Reply To: 1.-2. Ballot wordings Hull Cross section and Tiller

Home Forums IDNIYRA Technical Committee Discussion 1.-2. Ballot wordings Hull Cross section and Tiller Reply To: 1.-2. Ballot wordings Hull Cross section and Tiller

#324
Jerry Gapinski
Keymaster

    16. Fuselage side panel parallel projected planes intersecting with the deck or bottom parallel projected planes shall be approximately perpendicular to each other with an allowed deviation of about 2 degrees 90 degrees, +- 2 degrees from a point 6’’ (153. mm) from the bow to a point 6’’ (153. mm) from the stern. A maximum 1/4’’ (6.3 mm) radius is allowed on the outside top corner of the fuselage where the deck and side panel intersect. Concavities in the deck are not permitted. “

    I am OK with the modification. Is it right like this?

    Tx