Reply To: 1.-2. Ballot wordings Hull Cross section and Tiller

Home Forums IDNIYRA Technical Committee Discussion 1.-2. Ballot wordings Hull Cross section and Tiller Reply To: 1.-2. Ballot wordings Hull Cross section and Tiller

#325
Avatar photoSteve Orlebeke
Participant

    One more thought. I don’t think we want to lose the intent that the hull cross section be rectangular. How about this:

    16. Hull cross sections must be rectangular. Fuselage side panel parallel projected planes intersecting with the deck or bottom parallel projected planes shall be 90 degrees, +- 2 degrees from a point 6’’ (153. mm) from the bow to a point 6’’ (153. mm) from the stern. A maximum 1/4’’ (6.3 mm) radius is allowed on the outside top corner of the fuselage where the deck and side panel intersect. Concavities in the deck are not permitted. “