Reply To: 1.-2. Ballot wordings Hull Cross section and Tiller

Home Forums IDNIYRA Technical Committee Discussion 1.-2. Ballot wordings Hull Cross section and Tiller Reply To: 1.-2. Ballot wordings Hull Cross section and Tiller

#340
Avatar photoJeff Kent
Participant

    16. Hull outer surface cross sections must be rectangular +/- 2 degrees from a point 6’’ (153. mm) from the bow
    to a point 6’’ (153. mm) from the stern with exception in way of cockpit. A maximum 1/4’’ (6.3 mm) radius is allowed
    on the outside top corner of the fuselage where the deck and side panel intersect.
    Concavities in the deck are not permitted.
    this is text which will be on ballot